User guide

IN1604 DTP and IN1604 HD Scalers • Configuration Software 66
Input presets
There are 16 presets that are global to all inputs. The presets contain all of the settings for
an input when used with an upstream matrix switcher. Input presets save signal type, signal
sampling, and picture control settings.
To save an input preset:
1. From the Input Presets list (see figure 48,
1
on page 65), select the desired preset.
2. Click the Save Preset button (
2
). If the selected preset already has stored information
on it, the Presets dialog box opens. Click the Overwrite button to erase the previous
data and save the new settings. Click the Cancel button to cancel pending changes.
To rename a preset:
1. In the Input Preset Name column, double-click an Input Preset Name (
1
).
2. Change the name as desired.
3. Press the <Enter> key to save the new name.
To recall an input preset:
1. From the Input Presets list (
1
), select the desired preset.
2. Click the Recall Preset button (
3
). The Presets dialog box opens.
3. Click the Recall button to recall the preset. Click the Cancel button to return to the
Image Settings page.
To clear a preset:
1. From the Input Presets list (
1
), select the desired preset.
2. Click the Clear button (
4
). The Presets dialog box opens.
3. Click the Clear button to erase saved data. Click the Cancel button to return to the
Image Settings page.
User Presets
There are 16 user presets per input to save picture control settings only.
To save a user preset:
1. From the User Presets list (
5
), select the desired preset.
2. Click the Save Preset button (
6
). If the selected preset already has stored information
on it, the Presets dialog box opens. Click the Overwrite button to erase the previous
data and save the new settings. Click the Cancel button to cancel pending changes.
To rename a preset:
1. In the User Preset Name column, double-click a User Preset Name (
5
).
2. Change the name as desired.
3. Press the <Enter> key to save the new name.
To recall a user preset:
1. From the User Presets list (
5
), select the desired preset.
2. Click the Recall Preset button (
7
). The Presets dialog box opens.
3. Click the Recall button to recall the preset. Click the Cancel button to return to the
Image Settings page.
To clear a preset:
1. From the User Presets list (
5
), select the desired preset.
2. Click the Clear button (
8
). The Presets dialog box opens.
3. Click the Clear button to erase saved data. Click the Cancel button to return to the
Image Settings page.