User guide

IN1604 DTP and IN1604 HD Scalers • Configuration Software 63
Image Settings Page
From this page, signal sampling and picture control settings can be adjusted, user and input
presets can be saved and recalled, and overscan settings can be applied. Click the Image
Settings
icon (see figure 39,
3
on page 58) on the Global Navigation Bar to open the
Image Settings page.
Figure 44. Image Settings Page
Signal Sampling panel
Signal sampling optimizes the input signal to the scaler for the currently selected input.
Figure 45. Signal Sampling Panel
To manually adjust signal sampling settings, enter a value within the Min and Max values
displayed to the right of each adjustable settings (see figure 45,
1
) or click the Up or Down
arrows. An asterisk beside a chosen value indicates that it is a default value.
To automatically adjust these settings, perform one of the following:
• Click the Auto-Image button (
2
) to perform a one-time Auto-Image.
• Click the Auto-Image & Fill button (
3
) to perform a one-time Auto-Image and fill
the entire video output (ignores aspect ratio setting).
• Click the Auto-Image & Follow button (
4
) to perform a one-time Auto-Image and to
maintain the aspect ratio of the input signal (ignores aspect ratio setting).