User guide

IN1604 DTP and IN1604 HD Scalers • Configuration Software 62
Assigning EDID
To assign EDID to selected inputs:
1. From the inputs group box (table of inputs) on the right, select the check boxes for the
desired inputs (see figure 44,
8
on page 61).
2. From the Favorites, Connected Outputs, or Available EDID panel (
4
-
6
) on the left,
select the desired EDID.
3. From the inputs group box, click the Assign button (
9
) to assign EDID to the selected
input or inputs.
To assign EDID to all inputs:
1. From the Favorites, Connected Outputs, or Available EDID panel (
4
-
6
), select an
EDID.
2. From the inputs group box, click the Assign to All button (
-
).
NOTE: Checked or unchecked inputs are ignored and the EDID is assigned to all
inputs.
To match the selected inputs to the current output resolution:
Matching the output resolution is the default value for all inputs.
1. From the inputs group box (table of inputs) on the right, select the check boxes for the
desired inputs (
8
).
2. In the Output Resolution panel, click the Match Output button (
7
).
Adding EDID to the EDID Library
1. Click the Add EDID to Library button (
=
). The Add EDID to Library window opens.
2. Navigate to the desired EDID file location and select it.
NOTE: Valid EDID files have a .bin file extension.
3. Click the Open button. The EDID is added to the Available EDID panel (
6
).
Saving EDID to the EDID Library
1. From the Favorites or Connected Outputs panel (
4
-
5
), right-click on an EDID.
2. Select Save to EDID Library.
3. Click the OK button to save the file.
NOTE: Saving a factory scaler EDID exports an HDMI, LPCM-2Ch EDID to the PC. The
file is saved as a .bin file.