User guide

IN1604 DTP and IN1604 HD Scalers • Configuration Software 60
Output Configuration panel
The Output Configuration panel contains controls for output resolution and rate, format
settings, switch transitions, and available test pattern selections.
Figure 41. Output Configuration
To configure the output, perform the following:
1. From the Resolution drop-down menu (
1
), select the desired output resolution.
2. From the Refresh Rate drop-down menu (
2
), select the desired refresh rate.
3. From the HDMI drop-down menu (
3
), select the desired output format.
4. In the Switch Transitions panel (
4
), select one of the following radio buttons:
• Fade Through Black — Fades video to a black screen before switching to the
newly selected video.
• Cut — Switches video directly to the newly selected input.
5. To aid display device setup and optimization, select a test pattern from the drop-down
menu (
5
) in the Test Patterns panel.
Figure 42. Available Test Patterns
NOTE: No input signal is needed when using a test pattern for display device setup.