User guide

IN1604 DTP and IN1604 HD Scalers • Configuration Software 57
AV Controls Panel
The AV controls panel is used to control AV settings such as input selection, one-time
Auto-Image to an input, video and audio mute, and image freeze.
The panel also displays input and output information.
Figure 37. AV Controls Panel
AV Inputs buttons
Click an AV Inputs button (
1
) to select an input. As a new input is selected, the Active
Input section displays information about the current input.
NOTE: The signal indicators on the AV input buttons display green when a signal is
present on the corresponding input or gray when there is no signal present.
Auto-Image button
Click the Auto-Image button (
2
) to start a one-time Auto-Image on the currently selected
input.
Freeze button
Click the Freeze button (
3
) to freeze the input. The button turns blue.
Mute buttons
• Click the Audio Mute button (
4
) to globally mute only the audio. The button turns red
when enabled.
• Click the Video Mute button (
5
) to mute only the video. The button turns red when
enabled.
• Click the AV Mute button (
6
) to mute both the video and audio simultaneously. The
button turns red along with the Video Mute and Audio Mute buttons when enabled.
• Click the Sync Mute button (
7
) to mute the video and sync. The button turns red
along with the Video Mute button when enabled.
To unmute any signal, click the appropriate button. The button reverts to the default color,
indicating the signal has been unmuted.