User guide

IN1604 DTP and IN1604 HD Scalers • Configuration Software 53
Reset Device
This option opens a dialog box to confirm the resetting of device settings.
From the Device drop-down menu, select Reset Device.... The Reset Device dialog box
opens.
Figure 28. Reset Device Dialog Box
The reset changes all device settings to the factory defaults. It is the same as the
EZXXX} SIS command (see Reset SIS commands on page 45).
To reset the connected device, click the Reset button. To exit the Reset Device dialog box
without making any changes, click the Cancel button.
Backup and Restore
This option saves current configurations and restores saved configurations.
From the Device drop-down menu, click Backup and Restore.... The System Backup
and Restore dialog box opens.
Figure 29. Backup and Restore Dialog Box
To save the current configuration settings to an external file:
1. In the Backup panel, click the Browse button. The Save As window opens.
2. Navigate to the desired save location on the host device and click the Save button. The
window closes.
3. Click the Backup button to save the configuration to an external file on the host device.
4. Click the Close button to close the System Backup and Restore window.
To restore a saved configuration settings file:
1. In the Restore panel, click the Browse button. The Open window opens.
2. Navigate to the save location of the saved file and click the Open button. The Open
window closes.
NOTE: Valid configuration files have a .extz file extension.
3. Click the Restore button to apply the saved configuration settings.
4. Click the Close button to close the System Backup and Restore window.