User guide

IN1604 DTP and IN1604 HD Scalers • SIS Configuration and Control 39
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Output Configuration Commands
TMDS output format
Set format
EX3$VTPO} Vtpo X3$]
Set the color space and format of the
output to X3$.
View setting
EVTPO} X3$]
VtpoX3$]
View the color space and format setting.
Verbose mode 2 and 3
View auto output format
E1*VTPO} X3$]
View the Auto output color space.
Power save mode
Power save off
E0PSAV} Psav0]
Operate at full power.
Power save on
E1PSAV} Psav1]
Operate in a low power state. No video
output.
View setting
EPSAV} X4@]
View the power mode.
Screen saver
Set mode
EMX2*SSAV} SsavMX2*] Set the color of the screen saver to X2*.
View mode
EMSSAV} X2*]
SsavMX2*]
View the color of the screen saver.
Verbose mode 2 and 3
Set time-out duration
ETX2@SSAV} SsavTX2@] Set the time-out duration to X2@.
View time-out duration
ETSSAV} X2@]
SsavTX2@]
View the time-out duration.
Verbose mode 2 and 3
View screen saver status
ESSSAV} X4#]
SsavSX4#]
View the screen saver status.
Verbose mode 2 and 3
NOTES:
X2@ = Output sync timeout 0 = output sync is instantly disabled with no active input
1-500 (in 1 second increments)
501 = output sync never times out
X2* = Screen saver mode 1 = black output (default)
2 = blue output
X3$ = HDMI output format 0 = auto (default)
1 = DVI RGB 444
2 = HDMI RGB “Full”
3 = HDMI RGB “Limited”
4 = HDMI YUV 444 “Full”
5 = HDMI YUV 444 “Limited”
6 = HDMI YUV 422 “Full”
7 = HDMI YUV 422 “Limited”
X4@ = Power save mode 0 = full power mode (default)
1 = low power state
X4# = Screen saver status 0 = active input detected, timer not running
1 = no active input, timer running, output sync enabled
2 = no active input, timer expired, output sync disabled