User Guide

Video output
Number/signal type ........................ Scaled RGBHV, RGBS, RGsB; Y, R-Y, B-Y
Connectors .................................... 1 female 15-pin HD
Nominal level ................................. 1 Vp-p for Y of component video and for G of RGsB
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels .............. 0 V to 1.0 Vp-p
Impedance ..................................... 75 ohms
Vertical frequency ........................... 24 Hz, 50 Hz, 59.94 Hz, 60 Hz, or 75 Hz, depending on selected output resolution
Scaled resolution ............................ 640x480
1,2,3
, 800x600
1,2,3
, 852x480
1,2
, 1024x768
1,2,3
, 1024x852
1,2,3
, 1024x1024
1,2,3
,
1280x768
2
, 1280x800
1,2
, 1280x1024
1,2,3
, 1366x768
1,2,3
, 1365x1024
1,2,3
, 1400x1050
1,2
,
1440x900
2,3
, 1600x1200
1,2
, 1680x1050
2
, 480p
2,4
, 576p
1
, 720p
1,2,4
, 1080i
1,2,4
, 1080p
1,2,3,4
,
1080p Sharp
2
, 1920x1200
2
, 1080p CVT
2
1
= at 50 Hz,
2
= at 60 Hz,
3
= at 75 Hz (24 Hz for 1080p);
4
= 59.94 Hz
Return loss ..................................... -21 dB @ 5 MHz
DC offset ....................................... ±300 mV maximum with input at 0 offset
Sync
Input type ...................................... RGBHV, RGBS, RGsB, bi-level or tri-level component video
Output type ................................... RGBHV, RGBS, RGsB; Y, R-Y, B-Y (tri-level)
Standards ....................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ...................................... 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
Output level ................................... TTL: 5.0 Vp-p, unterminated
Input impedance ............................ 1k ohms
Output impedance ......................... 45 ohms
Max. input voltage ......................... 5V p-p
Polarity ........................................... Positive or negative (selectable)
Audio
Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ........................ 20 Hz to 20 kHz, ±1.7 dB
THD + Noise ................................... 0.03% @ 1 kHz at nominal level, 0 dB gain
S/N ................................................. >90 dB at rated maximum output
Crosstalk ........................................ <-70 dB @ 1 kHz
Stereo channel separation .............. >84 dB @ 1 kHz
Audio input
Number/signal type ........................ 8 stereo, unbalanced
Connectors .................................... 5 pairs of RCA (tip-ring) jacks
(3) 3.5 mm mini stereo (tip-ring-sleeve) jacks
Impedance ..................................... >10k ohms unbalanced, DC coupled
Nominal level ................................. +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level ............................... +10.4 dBu, (unbalanced) at 1% THD+N
Input gain adjustment .................... -65 dBu to +9 dBu, adjustable per input
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type ........................ 1 stereo, unbalanced
1 stereo, balanced/unbalanced
Connectors
.................................... 1 pair of RCA (tip-ring) jacks
(1) 3.5 mm captive screw connector, 5 pole
Impedance
..................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1 dB channel to channel
Maximum level (Hi-Z) ...................... >+16 dBu, balanced at 1% THD+N
>+10 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm) .............. >+10 dBu, balanced at 1% THD+N
>+7 dBu, unbalanced at 1% THD+N
IN1508 • Reference Information 62