User Guide

ManualsBrandsExtron Electronics ManualsAccessories for videoIN1508

The Color status indicator bar shows, and allows you to adjust, the color setting for the

selected input. Color increases and decreases the color intensity of the picture. Use the front

panel or IR remote control and buttons to adjust the contrast through a range of 0 to

128. At the minimum setting, 128, the switcher removes most of the color. The default

setting is 64.

Tint status indicator bar

NOTE: The tint adjustment is available for S-video and composite video inputs only (see

the table on page 17).

The tint status indicator bar shows, and allows you to adjust, the tint setting.

Tint is a relative measure of the amount of white in a given color and adjusts the color of

the picture toward red or green. Use the front panel or IR remote control

and buttons to

adjust the tint control through a range of 0 to 128. Press the button to increase the green

(and decrease the red). Press the button to increase the red (and decrease the green). The

default setting is 64.

Sharpness status indicator bar

The Sharpness status indicator bar shows and allows you to adjust the sharpness setting.

Sharpness uses variable ltering to affect input picture detail and denition. Use the front

panel or IR remote control and buttons to increase or decrease the sharpness ﬁltering

through a range of 0 to 128. The default setting is 64.

Output submenu

Figure 22 shows an overview of the Output submenu, its available selections, and their

available settings. Use the front panel or IR remote control and buttons to highlight the

desired selection and press the Enter button.

Timeout

display

AUDIO

PICTURE

INPUT

OUTPUT

ADVANCED

MenuMenu

Timeout

Enter

Timeout

1024 x 852

1024 x 1024

1366 x 768

1365 x 1024

800 x 600

640 x 480

1024 x 768

1280 x 1024

720 x 480

720 x 576

1600 x 1200

1400 x 1050

1280 x 720

1920 x 1080

SVGA

VGA

XGA

1280 x 768

SXGA

480p

576p

UXGA

720p

1080i

1080p

1440 x 900

1680 x 1050

1280 x 800

852 x 480

25 Hz

50 Hz

60 Hz

59.94 Hz

75 Hz

Sync H– / V+

Sync H– / V–

Sync H+ / V+

Sync H+ / V–

Resolution Resolution

Refresh Rate Refresh Rate

Sync Polarity Sync Polarity

Signal Type Signal Type

Press Enter to

select a change.

Press Enter to

select a change.

Press Enter to

select a change.

Press Enter to

select a change.

RGBHV

RGsB

Y,B-Y,R-Y

RGBS

Figure 22. Output Submenu Flowchart

IN1508 • Operation 27