User`s manual

HSA 822 Hideaway
®
Enclosure • Reference Information
HSA 822 Hideaway
®
Enclosure • Reference Information
Reference Information, cont’d
-or-
A-4
Included Parts
Part
HSA 822 User’s Manual
Snap-in icon inserts
RJ-45 connector bezel plug-in inserts
(assorted colors and blank)
1/4 - 20, 1", 1 ½", 2", 2 ½" full thread bolts
M6 x 65 mm, 50 mm, 40 mm, 25 mm full thread bolts
Template and Accessories
Part Part number
HSA 822 routing template 70-191-01
HSA 822 standard (10 lb) gas lift 70-193-01
HSA 822 RJ-11 cable kit 70-226-01
HSA 822 flexible conduit adapter kit 70-228-01
Interface Accessories
Accessory Part number
RGB 580xi 60-362-01
RGB 580xi AAP 3' (black) 70-128-02
RGB 580xi AAP 6' (black) 70-129-02
RGB 580xi S AAP 3' (black) 70-134-02
RGB 580xi S AAP 6'
(black) 70-135-02
RGB 580xi SI AAP 3' (black) 70-137-02
RGB 580xi SI AAP 6' (black) 70-138-02
Top Plate Dimensions
The preferred and recommended method for cutting the table is
to use the metal routing template , part # 70-191-01, (figure A-2
and chapter 2, “Installation”) and a router.
USER ACCESS
EXTRON ELECTRONICS
USER ACCESS
Figure A-2 — HSA 822 metal routing template
If you choose not to use metal routing template available from
Extron, the cut-out template (figure A-3) will help you properly
prepare the mounting surface. The cut-out template is not to
scale and is for reference only. The surface cut-out area
dimensions for the template are marked in bold type.
For a full size paper template, visit the Extron Web site
(www.extron.com) or call the Extron S
3
Sales & Technical
Support Hotline.
A-5