User Guide Manual

HDXP Plus Series Switchers • Matrix Software 91
5. On the Emulation Configuration window, select the number of video boards that your
model has and the matrix switcher model you are configuring, and click OK.
Figure 90. Emulation Configuration Window
6. Continue using the program as described in Using the Software on page 70.
Using the Matrix Switcher Help System
For information about program features, you can access the Matrix Switcher Help
program in any of the following ways:
• From the Extron Electronics program folder or Start menu group, select
the MATRIX Switcher + Help icon (shown at right).
• Within the Matrix Switcher Control Program, select Contents from the Help menu on
the Matrix window.
• From within the Matrix Switcher Control Program, press the <F1> key.