User Guide Manual

HDXP Plus Series Switchers • Matrix Software 87
• I/O Group settings — Opens the Input/Output Groups window, which allows
you to establish input and output groups. Drag two or more of the small boxes
representing inputs and outputs to one of the input or output Group boxes. Repeat as
desired. Click Take to establish the groups.
Figure 85. Input/Output Groups Window
• Room configuration — Allows you to assign outputs to rooms or delete outputs
from rooms. Drag one or more of the small boxes representing outputs to one of the
Room boxes. Repeat as desired to form additional rooms. Click Take to establish the
rooms.
NOTE: A room is a subset of outputs that are logically related to each other, as
determined by the operator. The HDXP switcher supports up to 10 rooms, each
of which can consist of from 1 to 16 outputs.
• Initialize — Displays a window on which you can select, initialize, and clear any or
all of the following: ties, presets, groups, preset names, icon names, and icons.
Preferences menu
The Preferences menu contains the following options:
• Immediate changes — Causes the configuration changes
you make to take effect immediately, without the need to
click a Take button. When you select this option, the Take
and Cancel buttons are removed from the Matrix window.
• Hold/Verify Changes — Delays implementation of
configuration changes until the Take button is pressed.