User Guide Manual
HDXP Plus Series Switchers • Remote Configuration and Control 61
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Information Requests (continued)
Request part number
N
60-nnn-01
]
Show the HDXP part number:
HDXP 3232 = 60-797-01
HDXP 3216 = 60-790-01
HDXP 1616 = 60-876-01
Query controller firmware
version
Q
X1(
]
View firmware version
X1(
to
the second decimal place.
Example:
Q
1.23
]
The factory-installed controller
firmware version is 1.23.
Query controller firmware
version (verbose mode)
0Q
X1( X2) X1( X2)
]
Provide a detailed status
of the Ethernet protocol
firmware, the HDXP firmware,
and any firmware upgrade.
The firmware that is currently
running is marked by an
asterisk (*). A caret (^)
indicates that the firmware has
a bad checksum or an invalid
load. ?.?? indicates that
firmware is not loaded.
Response format: Ethernet protocol rmware version – rmware version – updated rmware version
Example:
0q
(See below.)
Meaningless data
for this switcher model
Description
HDXP 3216 firmware version
n.nn – 1.00(1.50-SDI Series – Wed, 04 Jan 2006 23:11:29 GMT) – 1.00*(1.57-SDI Series – Fri, 19 Apr 2013 20:02:35 GMT)
Updated firmware version
* Indicates the version running Upload date and time
Response:
NOTE: There are up to three separate sets of Extron firmware on which the HDXP can report: the HDXP Plus Series
control firmware, which is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet
interface; and the latest optional Extron firmware update, which is available at www.extron.com.
Request system status
S
X2@
]
Display power supply voltages
and internal temperature
X2@.
Example:
S
3.29 5.15 91.40
]
3.29 and 5.51 are the power
supply voltages. 91.4 (°F) is
the unit internal temperature.
View File Directory Commands
NOTE: The response to the View File Directory command differs depending on whether the command is sent via an
RS-232, RS-422, or Telnet connection, or via a web browser connection.
View file directory
RS232/RS422 port and Telnet
E
DF
}
lename1,date/time,length
]
lename2,date/time,length
]
lename3,date/time,length
]
•••
lenamen,date/time,length
]
List user-supplied files that
have been uploaded to the
root (\) directory and any
subdirectories, followed by the
number of bytes of space left
in the entire directory.
{space remaining} bytes • left
]
]
NOTE:
X1(
= Firmware version Firmware version number to second decimal place.
X2)
= Firmware version, verbose mode Version – description – date and time of upload
X2@
= Power supply voltages and temperature Voltage • voltage • internal temperature