User Guide Manual
HDXP Plus Series Switchers • Remote Configuration and Control 54
Command and Response Table for SIS Commands
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Create Ties
NOTES: • Commands can be entered back-to-back in a string, with no spaces between commands.
Example: 1*1!02*02&003*003%4*8&
• The Quick multiple tie and Tie input to all outputs commands activate all I/O switches simultaneously.
• The HDXP switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
• The & tie command for RGB, the % command for video, and the ! command for all types of ties can be
used interchangeably.
• To untie an output from all inputs, enter a tie command in which
X@
(the input ) = 0.
Tie an input
to an output
X@
*
X#
!
X@
*
X#
&
X@
*
X#
%
Out
X#
•
In
X@
•
All
]
Out
X#
•
In
X@
•
RGB
]
Out
X#
•
In
X@
•
Vid
]
Tie input
X@
to output
X#
.
! = all signal types
& = RGB
% = composite or S-video
(See the second bullet point in
the notes above.)
Example:
1*3!
Out3
•
In1
•
All
]
Tie input 1 to output 3 (any
type).
Quick multiple tie
E
+ Q
X@
*
X#
%...
X@
*
X#
!
}
Qik
]
Tie multiple inputs (
X@
) to
multiple outputs (
X#
) with a
single command.
Example:
E
+ Q3 * 4 % 3 * 5 % 3*6!
}
Qik
]
Tie input 3 video to output 4,
tie input 3 video to output 5,
and tie input 3 to output 6.
Tie an input to all outputs
X@
*!
X@
* &
X@
* %
In
X@
•
All
]
In
X@
•
RGB
]
In
X@
•
Vid
]
Tie input
X@
to all outputs.
! = all signal types
& = RGB
% = composite or S-video
(See the second bullet point in
the notes above.)
Example:
5 * &
In5
•
RGB
]
Tie input 5 RGB to all outputs.
Mute Commands
Video mute
X#
* 1B Vmt
X#
*1
]
Mute output
X#
video (video
off).
Video unmute
X#
* 0B Vmt
X#
* 0
]
Unmute output
X#
video
(video on).
View individual mute status
X#
B
X1$
]
View mute status
X1$
for video
output
X#
.
NOTE:
X@
= Input number (for ties) 0 – maximum number of inputs for your model (0 = untied)
X#
= Output number 1 – maximum number of outputs for your model
X1$
= Mute status for individual output 0 = unmuted, 1 = muted