User Guide Manual

HDXP Plus Series Switchers • Operation 32
3. Press and release the input or output button for the desired preset. In figure 49,
preset 1 (Input button 1) is selected.
C O N T R O L
PRESET ENTER
ESCVIEW
INPUTS
1
2
3 4
5
6
7 8
9
17
18
19 20
21
22
23 24
2
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not recalled.
The Enter button blinks
to indicate the need to
recall the preset.
= Blinking Button
Figure 49. Select the Preset
4. Press and release the Enter button (see figure 50). The configuration stored in
selected memory location is now the current configuration and can be viewed in
view-only mode (see Viewing the Configuration on page 24).
C O N T R O L
PRESET ENTER
ESCVIEW
1 2
17 18
17 18
1 2
Inputs
All input buttons become unlit or
return to background illumination.
The Enter and Preset
b
uttons become unlit or
retur
n to background
illumination.
Press the Enter button to
recall the preset.
Figure 50. Pressing Enter to Recall the Preset
5. Press and release the View
<
button to return the HDXP to normal switcher
operation.