User guide

Command ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
HDCP Authorized Device
Enable or disable HDCP
authorization
EEX#HDCP} HdcpEX#] X# = 0 (HDCP authorization
enabled)
or 1 (HDCP authorization
disabled)
Request HDCP
authorization status
EEHDCP} X#]
EDID Minder
Assign EDID to input
EAX%EDID} EdidAX%] X% = EDID memory location (1‑58)
see the "HDMI DA4 and HDMI
DA6 EDID Memory Locations"
table on page 12
View EDID assignment
EAEDID} X%]
Save EDID of output to
user location
ESX!*X%EDID} EdidSX!*X%]
Store the EDID of output X! into
EDID memory location X% (55‑58)
View/Read EDID in Hex
EREDID} X^]
Read out EDID in Hex from currently
selected EDID
View EDID native resolution
ENEDID} X&]
Resolution and refresh rate of
currently selected EDID
Example: 1600x1200@60Hz
Unit Name
Set unit name
EX(CN} Ipn•X(] X( = Up to 24 alphanumeric
characters, including "‑"
Set unit name to factory
default
E•CN}
Ipn•HDMA‑DA‑
SERIES
]
View unit name
ECN} X(]
Other
Request part number
N
60‑998‑01
]
60‑999‑01]
HDMI DA4
HDMI DA6
Query firmware version
Q
X*] X* = Firmware build (2 decimal
places)
Reset
EZXXX} Zpx]
HDMIDA4andHDMIDA6•SISCommands 18