User Manual

Upgrade Guide, cont’d

Global Conﬁgurator, Windows-based Control Programs

PRELIMINARY

The patch (applicable to ﬁrmware versions prior to 2.00) loads into a standardized

location on your computer using a Windows installer application. The speciﬁc ﬁle

name for this patch is 503512V100.s19. The following ﬁles are loaded onto your

computer:

• 503512V100.S19

• System_5_IP_FW_Patch_Instruction_01.pdf

• Patch_Web_Loader_Sys5IP.html

• System_5_IP_19_1335_50_V2_00.S19

• System_5_IP_FW_Revision_History_04.pdf

Upgrade instructions using the Patch Web Loader

An easy to use program called the Patch Web Loader can be loaded onto your

System 5 IP switcher to facilitate the upgrade process. After running the software

setup, follow the instructions below to ensure a proper update to the System 5 IP

switcher.

Step 1: Load the Patch Web Loader.

After you run the software installer, the Patch Web Loader program copies itself

onto your hard drive, but must be uploaded to the switcher.

1. Using Internet Explorer

, browse to the System 5 IP internal Web page by

entering http://x.x.x.x/nortxe_index.html, where x.x.x.x is the IP address

of the product to update.

2. Select the File Management tab and browse to the directory speciﬁed

during setup. The default location is

C:\Program Files\Extron\Firmware\System_5_IP\04.

3. Select the Patch Web Loader ﬁle, Patch_Web_Loader_Sys5IP.html, and

then click Upload File to initiate the process.

PRELIMINARY