User manual

CHAPTER 13
Audio
124 Catalyst® V3 Media Server User Manual
Activating the Audio Input
7. Use the Audio Input panel on the Catalyst Control window to activate Audio Input.
When the Visual Effects parameter is
assigned a DMX value of 123, the Layer’s
content is
replaced with a waveform of the
audio input.
The Parameter 1 (FX1) selects different types
of audio waveforms. The Parameter 2 (FX2)
parameter does not function with this Visual
Effect.
Waveform Type Selection
The following chart lists the waveform types available by
adjusting the Parameter 1 (FX1) parameter:
Waveform Type
DMX
Value
Mono Sound Waveform with Solid Outline
0
Mono Sound Envelope with Solid Outline 1
Mono Sound Single Waveform with Solid Outline 2
Mono Sound Single Waveform with Dashed Outline 3
Stereo Sound Dual Envelope with Solid Outline 4
Spectral Analysis by Frequency 5
Phase Vector Scope drawn as Solid Lines 6
Phase Vector Scope drawn as Solid Lines 7
Phase Vector Scope drawn as Dots 8
Click on the round On/Off button to activate the Video Input panel
A Layer displaying an
audio input waveform.