User Guide Owner manual

Command/Response Table for Transmitter SIS Commands
Command ASCII Command
(host to unit)
Response
(unit to host)
Additional description
Switch status
Request EDID and refresh
rate switch positions
E
Stat
}
EdidMdr
X!
•Vrate
X@]
Example:
E
Stat
}
EdidMdr15•Vrate2
]
EDID switch is set to 15 (1080p) and the vertical
rate switch is set to 2 (60 Hz).
Request EDID switch position
E
2Stat
} X!]
Request Refresh rate switch
position
E
3Stat
} X@]
EDID minder
NOTES: • The table below the commands defines the value of each EDID value.
• The front panel EDID minder rotary switch on the transmitter must be in position 1 for the variables to be changeable via an SIS
command. The unit returns the E14 error if the switch is in other than position 1.
Set EDID resolution and
refresh rate
E
A
X#
EDID
}
Edid•A
X#]
Assign an EDID value of
X#
.
Example:
EA58EDID}
Edid•A58
]
Assign an EDID value of 720p at 60 Hz (the default
resolution and rate).
View assigned EDID
E
AEDID
} X#]
The assigned EDID value is
X#
.
Save EDID
E
S0EDID
}
EdidS0
]
Save the resolution of the display connected to the
transmitter pass-through port to EDID location 0.
Show native EDID value
E
NEDID
} X$]
Show the native resolution of the display connected
to the receiver.
Import EDID
E
I0EDID
}X%
EdidI
]
X#
Value
X#
Value
X#
Value
X#
Value
X#
Value
00 User captured EDID
DVI Pro values (with HDMI-to-DVI adapters)
01 800x600 @ 50 Hz 07 1280x768 @ 50 Hz 13 1360x768 @ 50 Hz 19 1440x900 @ 50 Hz 25 1680x1050 @ 50 Hz
02 800x600 @ 60 Hz 08 1280x768 @ 60 Hz 14 1360x768 @ 60 Hz 20 1440x900 @ 60 Hz 26 1680x1050 @ 60 Hz
03 1024x768 @ 50 Hz 09 1280x800 @ 50 Hz 15 1366x768 @ 50 Hz 21 1600x900 @ 50 Hz 27 1920x1080 @ 50 Hz
04 1024x768 @ 60 Hz 10 1280x800 @ 60 Hz 16 1366x768 @ 60 Hz 22 1600x900 @ 60 Hz 28 1920x1280 @ 60 Hz
05 1280x720 @ 50 Hz 11 1280x1024 @ 50 Hz 17 1400x1050 @ 50 Hz 23 1600x1200 @ 50 Hz 29 1920x1200 @ 50 Hz
06 1280x720 @ 60 Hz 12 1280x1024 @ 60 Hz 18 1400x1050 @ 60 Hz 24 1600x1200 @ 60 Hz 30 1920x1200 @ 60 Hz
HDMI PC values, all with 2-channel embedded audio
31 1024x768 @ 50 Hz 36 1280x800 @ 60 Hz 41 1366x768 @ 50 Hz 46 1440x900 @ 60 Hz 51 1680x1050 @ 50 Hz
32 1024x768 @ 60 Hz 37 1280x1024 @ 50 Hz 42 1366x768 @ 60 Hz 47 1600x900 @ 50 Hz 52 1680x1050 @ 60 Hz
33 1280x768 @ 50 Hz 38 1280x1024 @ 60 Hz 43 1400x1050 @ 50 Hz 48 1600x900 @ 60 Hz 53 1920x1200 @ 50 Hz
34 1280x768 @ 60 Hz 39 1360x768 @ 50 Hz 44 1400x1050 @ 60 Hz 49 1600x1200 @ 50 Hz 54 1920x1200 @ 60 Hz
35 1280x800 @ 50 Hz 40 1360x768 @ 60 Hz 45 1440x900 @ 50 Hz 50 1600x1200 @ 60 Hz
HDMI HDTV values, all with 2-channel embedded audio
55 480p @ 60 Hz 57 720p @ 50 Hz 59 1080i @ 50 Hz 61 1080p @ 50 Hz
56 576p @ 50 Hz 58* 720p @ 60 Hz 60 1080i @ 60 Hz 62 1080p @ 60 Hz
* Default value
NOTE: X! = EDID hex switch position 00 = User captured EDID 04 = 1280x720* (720p) 08 = 1360x768 12 = 1600x1200
01 = RS-232 control 05 = 1280x768 09 = 1366x768 13 = 1680x1050
02 = 800x600 06 = 1280x800 10 = 1400x1050 14 = 1920x1080p* (1080p)
03 = 1024x768 07 = 1280x1024 11 = 1440x900 15 = 1920x1200
* 720p and 1080p also include a block for embedded audio; all other positions are video only
X@ = Refresh rate 1 = 50 Hz 2 = 60 Hz
X# = EDID See the table above.
X$ = Native resolution Resolution and rate in an easily-viewed format, such as “800x600@60Hz“
X% = EDID record 128 or 256 bytes
FOXBOX Tx/Rx HDMI • Remote Control 20