User`s manual

FOXBOX 4G Tx/Rx • Remote Control
Remote Control, cont’d
3-22
FOXBOX 4G Tx/Rx • Remote Control
3-23
Figure 3-5 — Open window
8. Click Upload. The File Loader reports, "This process could
take several minutes. Please wait..." and then displays the
status of the upload.
9. When the Firmware Loader reports, "Transfer complete!",
click the Exit button.
10
. Cycle the FOXBOX 4G unit's power.
11. If necessary, repeat this entire procedure on the other unit
of the transmitter/receiver pair.