User guide

FOXBOX Tx/Rx • Remote Control 35
2. If you have not previously updated firmware for the FOXBOX unit before, on the Add
Device screen (figure 21), select the RS-232 tab.
If you have previously updated firmware for this model, click Cancel. The Firmware
Loader window appears. Proceed to step 5.
NOTES: • Although the screen also has a TCP/IP tab, the FOXBOX unit does not
have a LAN port. Do not select the TCP/IP tab.
• Figure 21 shows the default values.
Figure 21. Add Device Screen
3. From the drop-down menus on the RS-232 screen, select the appropriate Com port
number and baud rate (the default is 9600).
4. Click OK. The Firmware Loader window appears (figure 22).
5
Figure 22. Extron Firmware Loader Window
5. Select the FOXBOX unit and click File > Open. The Choose Firmware File screen
appears (figure 23).
6
6
Figure 23. Choose Firmware File Window