User guide
FOX T UWP 302 Wallplate Transmitter • Introduction 1
Introduction
This section contains general information about this guide, the FOX T UWP 302 Universal
Wallplate Transmitter, and selected device features. Topics in this section include:
• About this Guide
• About the FOX T UWP 302
• Key Features
About this Guide
This guide describes installation, operation, and control procedures, and reference
information for the FOX T UWP 302 Universal Wallplate Transmitter. In this guide,
“FOX T UWP 302” refers to the FOX T UWP 302 Universal Wallplate Transmitter in
singlemode or multimode.
About the FOX T UWP 302
The Extron FOX T UWP 302 is a three-gang universal wallplate transmitter with a two input
integrated switcher that provides long haul transmission of HDCP-compliant HDMI, RGBHV,
or HD component video; stereo audio; and RS-232 signals over fiber optic cabling. It
delivers pixel-for-pixel transmission of images up to 1920x1200 and 2K, including HDTV
1080p @ 60 Hz.
To configure and control the FOX T UWP 302, connect a host device, such as a computer,
and enter Simple Instruction Set (SIS) commands (see SIS Configuration and Control
on page 15) or use the FOX Extenders Control Program (see FOX Extenders Control
Program on page 23).
WARNING: Potential risk of severe injury. The FOX T UWP 302 outputs continuous
invisible light, which may be harmful to the eyes; use with caution.
AVERTISSEMENT: Risque potentiel de blessure grave ou de mort. Le
FOX T UWP 302 émet une lumière invisible en continu qui peut être dangereux pour
les yeux, à utiliser avec précaution.
• Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
• Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
• Plug the attached dust caps into the optical transceivers when the fiber cable is
unplugged.
• Branchez les protections contre la poussière dans l’ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.