User guide

FOX T UWP 302 Wallplate Transmitter • FOX Extenders Control Program 34
Control tab
The Control tab contains picture and audio adjustments. To access these options, click
the Control tab.
Figure 25. Control Tab
VGA Video Adjustment panel
The VGA Video Adjustment panel of the Control tab adjusts the following video
parameters on the analog input: horizontal start, pixel phase, and total pixels.
Figure 26. VGA Video Adjustment Panel
Horizontal Start — Defines the number of pixels in the blanking area to the left of the
active area.
In the Horizontal Start panel of the VGA Video Adjustment panel, click the Left or
Right arrows, or click and drag the slider to adjust the setting to the desired value. The field
to the right of a slider shows the current value for the associated setting.
NOTE: The value for Horizontal Start can range between 0 and 255.
Default setting: 128.