User guide

FOX T UWP 302 Wallplate Transmitter • Installation and Operation 9
Inside-the-Faceplate Features
LINK 1 LINK 2
HDMI INPUT
AUDIO INPUT
COMPUTER INPUT
POWER
RESET
CONFIG
PC
HDMI
HDCP
AUDIO
A
B
C
Figure 5. FOX T UWP 302 Under-the-Faceplate Features
A
Link 1 and Link 2 LED indicators — Light when there is light present on the
corresponding fiber optic port.
B
Reset button — Press the Reset button to return device settings or firmware to the
factory default settings (see System Reset on page 14).
C
Config port — Connect a host device, such as a PC, to the USB mini-B configuration
port for RS-232 protocol control of all FOX T UWP 302 functions. Configure the
FOX T UWP 302 with SIS commands (see SIS Configuration and Control on
page 15) or the FOX Extenders control program (see FOX Extenders Control
Program on page 23).