User guide

FOX T UWP 302 Wallplate Transmitter • Introduction 2
12V
1.0A MAX
FOX SR HDMI
POWER
LINK
LINK
OPTICAL
RxTx
HDMI AUDIO
HDMI
AUDIO
OUTPUTS
ON
OFF
REMOTE
RS-232
Tx Rx
RS-232
OVER FIBER
ALARM
Tx Rx
1 2
L
R
POWER
PC
HDMI
HDCP
AUD
IO INPUT
HDMI INPUT
COMPUTE
R INP
UT
AUDIO
STANDBY
CLASS 2 WIRING
1
2
XPA 1002
LEVEL
1
1
2
1
2
LIMITER/
PROTECT
SIGNAL
2
INPUTS
OUTPUT
REMOTE
0
0
VOL/MUTE
10V 50 mA
100-240V 1.3A, 50-60Hz
Extron
XPA 1002
Power
Amplier
Extron
SI 28
Surface-
mount
Speakers
Extron
FOX T UWP 302
Fiber Optic
Transmitter
Laptop
with HDMI
Output
Flat Panel
Display
HDMI + Audio
HDMI
Up to 30 km (18.75 miles)
Singlemode Fiber
SM Model
Audio
Audio
VGA
Laptop
with VGA
Output
Ext
ron
FO
XBOX SR HDMI
Fi
ber Optic Receiver
Figure 1. Typical FOX T UWP 302 Application
System Compatibility
The FOX T UWP 302 supports Plus or Non-Plus mode transmission for compatibility with
FOX receivers. Devices in Plus mode are only compatible with other devices in Plus mode.
Use SIS commands (see Plus mode transmission on page 20) or the FOX Extenders
Control Program (see Plus Mode Transmission panel on page 36) to change the mode.
• Non-Plus — Supports resolutions from 640x480 up to 1600x1200 @ 60 Hz, including
480p up to 1080p @ 60 Hz. Embedded audio is not supported, but analog audio is
supported and HDCP compliant.
• Plus — Supports all resolutions supported in non-plus mode, plus 1920x1200 and
2K (2048x1080) @ 60 Hz. Embedded audio and analog audio are supported and are
both HDCP compliant.
Supported Receivers
Plus Mode Non-Plus Mode
FOXBOX Rx DVI Plus FOXBOX Rx VGA
FOXBOX Rx HDMI FOXBOX Rx DVI
FOXBOX SR HDMI FOX 500 DVI Rx
PowerCage FOX Rx DVI Plus FOX 500 Rx
PowerCage FOX Rx HDMI PowerCage FOX Rx VGA
PowerCage FOX SR HDMI PowerCage FOX Rx DVI
FOX II R DP