User Guide

FOX RS 104 RS-232 Inserter • Remote Control 26

Uploading the firmware to the inserter

Update the firmware on your FOX inserter:

1. Connect the PC to the FOX inserter via the LAN port of the inserter.

2. Access the FOX inserter using HTML pages.

3. Click the Configuration tab (see figure 20).

Figure 20. Firmware Upgrade

4. Click the Firmware Upgrade link.

5. Click the Browse button. An open file window appears.

6. Navigate to the folder where you saved the firmware upgrade file and select it.

7. Click the Open button.

8. Click the Upload button. The firmware upload may take a few minutes.