User Guide

FOX RS 104 RS-232 Inserter • Remote Control 22
RS-232 Port Settings page
Access the Port Settings page (see figure 13) by clicking the Port Settings link on the
System Settings page.
System Settings
Refresh
Passwords
Firmware Upgrade
Figure 13. RS-232 Port Settings Page
To tailor the serial data output on one of the fiber optic ports, select the radio button for a
port and then use the drop-down boxes to select the baud rate, number of data bits, parity,
and number of stop bits.
Passwords Page
Access the Passwords page (see figure 14) by clicking the Passwords link on the System
Settings page.
System Settings
Port Settings
Refresh
Firmware Upgrade
Figure 14. Passwords Page
NOTE: If the inserter is password protected, fields on this page can be edited only by
people logged in as administrators.