User Guide

FOX RS 104 RS-232 Inserter • Remote Control 20
IP Address field — The IP Address field contains the IP address of the connected
inserter. This value is encoded in the flash memory of the inserter.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric octets separated by dots
(periods). Each field can be numbered from 000 through 255. Leading zeroes, up to 3 digits
total per field, are optional. Values of 256 and above are invalid.
The factory-installed default address is 192.168.254.254, but if this conflicts with other
equipment at your installation, you should ask your network administrator for a new, valid
address.
NOTE: IP address changes can cause conflicts with other equipment. Only local system
administrators should change IP addresses.
Gateway IP Address field — The Gateway IP Address field identifies the address of the
gateway to the mail server to be used if the inserter and the mail server are not on the same
subnet.
The gateway IP address has the same validity rules as the system IP address.
Subnet Mask field — The
Subnet Mask field is used to determine whether the inserter is
on the same subnet as the mail server when you are subnetting.
MAC Address field — The Media Access Control (MAC) Address is hardcoded in the
inserter and cannot be changed.
Firmware field — The Firmware field identifies the installed firmware version. This field is
hardcoded in the inserter and cannot be changed.
Model field — The Model field identifies the number of inputs and outputs. This field is
hardcoded in the inserter and cannot be changed.
Part Number field — The Part Number field identifies the part number of your inserter.
This field is hardcoded in the inserter and cannot be changed.
Date/Time Settings fields — The Date/Time Settings fields (see figure 12) provide a
location for viewing and setting the time functions.
Figure 12. Date/Time Settings Fields