User Guide
FOX RS 104 RS-232 Inserter • Remote Control 14
X1# = Number of open connections 0 – 200
X1$ = Password 12 alphanumeric characters
NOTE: The HTML language reserves certain characters for specific functions (see “Special Characters” on page 28).
X1% = DHCP 0 =off, 1 = on
X1^ = Baud rate 9600, 19200, 38400, 115200
X1& = Parity odd, even, none, mark, space (Only the first letter required.)
X1* = Data bits 7, 8
X1( = Stop bits 1, 2
X2) = Port type (always 0 = RS-232)
X2! = Verbose mode 0 = clear/none (default for Telnet connection) 2 = tagged responses for queries
1 = verbose mode (default for RS-232) 3 = verbose mode and tagged for queries
NOTE: If tagged responses is enabled, all read commands return the constant string and the value as the set command does
(for example, the read matrix name command,
E
CN
}
,returnsIpn•
X%]
).
X2@ = Port timeout interval (in 10-sec. increments) 1 (= 10 seconds) – 65000 (default is 30 = 300 seconds = 5 minutes)
X2# = Direct access port map 0 (= disabled) or 1024 and up (default is 2001)