User guide

The radio buttons and check boxes associated with each address field permit the
administrator to specify specific email requirements for each recipient.
Edit these fields and controls as follows:
1. Click in the desired E-mail Addressee field. The graphic cursor becomes a text cursor.
2. Edit the email address as desired. Standard email address conventions
(for example: [e-mail]) apply.
3. Press the <Tab> key on the keyboard or click in another field to exit the E-mail
Addressee field.
4. In the square check boxes associated with each addressee, select one or more options
about which the addressee is to be emailed: Missing Input(s) , Fans , and Power
Supply . In the floating box that contains the input numbers, select the inputs to be
monitored.
5. In the round radio buttons associated with each addressee, select whether the
addressee is to be emailed of failures, fixes, both, or not to be notified.
The None radio button is useful for temporarily removing personnel from the email list
when they are unavailable, such as when travelling or on vacation.
6. If desired, click the Send test E-mail button to test the email function.
7. Click the Take button to make the email address changes take affect.
Updating the Firmware
The firmware upgrade utility provides a way to replace the firmware that is coded on the
control board of the switcher without taking the switcher out of service.
NOTE: Upgrading the firmware does not overwrite the current configuration or
presets.
Update the switcher firmware as follows:
1. Perform steps 1 through 5 of Installing the Software, on page 72, to download the
firmware upgrade from the Extron website.
2. Click Run in the File Download and Security Warning dialog boxes (see
figure 38 on the next page,
1
). The PC extracts the firmware update received from
the Extron website and starts the Extron Installation Program to extract the firmware file.
3. Click Next in the Firmware Upgrade window (
2
). The program extracts the firmware
files and places them in a folder identified in the InstallShield Wizard window.
ATTENTION:
• The firmware file must have an .s19 extension. Other file types can cause the
switcher to stop functioning.
• Le firmware doit avoir une extension .S19. D’autres types de fichiers peuvent
nuire au fonctionnement de l’émetteur.
NOTES:
• Note the folder to which the firmware file is saved. When downloaded
from the Extron website, the firmware is placed in a subfolder of:
• Windows 7 or Windows 8: C:\Program Files (x86)\Extron\Firmware
• Older versions: C:\Program Files\Extron\Firmware
• The original factory-installed firmware is permanently available on the matrix
switcher. If the attempted firmware upload fails, the switcher reverts to the
factory-installed firmware.
FOX Matrix 3200 and 7200 Switchers • Matrix Software 80