User guide

The current configuration (see figure 19) is now input 5 tied to output 3, output 4, and
output 8.
Input 5 tied
to outputs 3, 4, and 8
Input
Output
3
4
8
5
Figure 19. Final Configuration, Example 1
Example 2: Add a tie to a set of ties
In the following example, a new tie is added to the current configuration. The example
shows the front panel indications that result from your actions.
NOTE: This example assumes that you have performed example 1 on the previous
page.
1. Clear all selections: Press and release the Esc button.
2. Select an input: Press and release the Input 5 button.
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
INPUTS
OUTPUTS
Press and release the button.
The button lights.
The Output 3, Output 4, and Output 8 buttons light
to indicate the ties created in example 1.
3. Select the output: Press and release the Output 1 button.
C O N T R O L
PRESET ENTER
ESCVIEW
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
The Enter button blinks
to indicate the need to
confirm the change.
Press and release the button.
The button blinks to indicate that the
selected input will be tied to this output.
FOX Matrix 3200 and 7200 Switchers • Operation 28