User guide

E
View (
<
) button — The View (
<
) button has one primary function (❏) and three
secondary functions (•):
❏ Select and indicate View-only mode, which displays the current configuration.
NOTE: View-only mode also provides a way to mute and unmute the outputs.
• In the I/O Group mode, selects group 3 and indicates the selection.
• With the Enter, Preset, and Esc buttons, selects Serial Port Selection and
Configuration mode.
• Selects 38400 baud for the rear panel Remote port in Serial Port Selection and
Configuration mode, and indicates the selection.
F
Esc (
>
) button — The Esc (
>
) button has two primary functions (❏) and four secondary
functions (•):
❏ Cancels operations or selections in progress and resets the front panel button
indicators.
NOTE: The Esc button does not reset the current configuration or any presets.
❏
Flashes once to indicate that the escape function has been activated.
• In the I/O Group mode, selects group 4 and indicates the selection.
• With the Enter, Preset, and View buttons, selects Serial Port Selection and
Configuration mode.
• Selects 115200 baud for the rear panel Remote port in Serial Port Selection and
Configuration mode and indicates the selection.
• With the Enter button, toggles the front panel lock on or off.
Power Indicators
G
Primary and Redundant Power Supply LEDs —
Green — Indicates that the associated power supply is operating within normal
tolerances.
Red — Indicates that the associated power supply is operating outside the normal
tolerances or has failed. See Removing and Installing a Power Supply Module
on page 113 to replace the power supply.
FOX Matrix 3200 and 7200 Switchers • Operation 23