User guide

5. Click the Firmware Upgrade link (see figure 61 on the previous page,
2
).
6. Click the Browse button (
3
). A Choose File to Upload dialog box appears.
7. Navigate to the folder where you saved the firmware upgrade file and select it (
4
).
ATTENTION:
• The firmware file must have an .s19 extension. Other file types can cause the
switcher to stop functioning.
• Le firmware doit avoir une extension .S19. D’autres types de fichiers peuvent
nuire au fonctionnement de l’émetteur.
NOTES:
• When downloaded from the Extron website, the firmware is placed in a
subfolder of:
• Windows 7 or Windows 8: C:\Program Files (x86)\Extron\Firmware
• Older versions: C:\Program Files\Extron\Firmware
• The original firmware is permanently available on the switcher. If the attempted
firmware upload fails, the switcher reverts to the factory-installed firmware.
8. Click the Open button (
5
).
9. Click the Upload button (
6
). The firmware upload may take a few minutes.
File Management Tab
File Management Page
To delete files such as user-supplied HTML pages from the switcher or to upload your own
files to the switcher, click the File Management tab. The switcher downloads the File
Management HTML page (see figure 62).
Figure 62. File Management Page
NOTE: Figure 62 is an example only. Files shown may not be present on your switcher.
To delete a file, click the Delete button associated with that file.
FOX Matrix 3200 and 7200 Switchers • HTML Operation 106