User Guide User guide

FOX II DP Transmitter and Receiver • Installation and Operation
16
Indications and Operation
Transmitter Indications
HDCP
SIGNAL
RETURN OUT
INPUT
CONFIG
VIDEO AUDIO
32
1
Figure 12. FOX II DP Transmitter Front Panel Features
a (power) indicator — Indicates that power is applied to the unit.
b Video LEDs —
Signal LED — Lights when the transmitter detects an active signal on its video input.
HDCP LED — Lights when the input signal is HDCP encrypted.
c Audio LEDs —
Input LED — Lights when the transmitter either:
• Detects a low level audio signal for a short period of time on the analog input. It
returns to unlit if the audio signal drops below the minimum threshold for a short
period of time.
• Detects embedded audio.
Return Out LED — Lights when the transmitter detects a signal on its Return Audio
Output connector.
Receiver Indications
HDCP
SIGNAL
RETURN IN
OUTPUT
CONFIG
VIDEO AUDIO
5 6
4
Figure 13. FOX II DP Receiver Front Panel Features
d (power) indicator — Indicates that power is applied to the unit.
e Video LEDs —
Signal LED — Lights when an active DisplayPort signal is detected on the fiber input of
the receiver.
HDCP LED — Lights when the input video signal detected on the fiber input is HDCP
encrypted.
f Audio LEDs —
Output LED — Lights on the receiver when the transmittereither:
• Detects a low level audio signal for a short period of time on the analog input. It
returns to unlit if the audio signal drops below the minimum threshold for a short
period of time.
• Detects embedded audio.
Return In LED — Lights when the receiver detects a signal on its Return Audio Input
connector.