User`s manual

FOX 500 Tx/Rx • Remote Control
Remote Control, cont’d
4-24
FOX 500 Tx/Rx • Remote Control
4-25
Figure 4-9 — Open window
a. Click Browse. The open file window appears.
b. Navigate to the folder where you saved the firmware
upgrade file. Select the file. The Firmware Loader
returns to the top.
N
Valid firmware files must have the file extension “.BIN”.
Any other file extension is not a firmware upgrade for your
FOX 500.
c. Click Upload. The File Loader reports, "This process
could take several minutes. Please wait..." and then
displays a scroll bar that shows the status of the
upload.
d. When the Firmware Loader reports, "Transfer complete!",
click the Exit button.
6. Cycle the FOX 500 unit's power.
7. If necessary, repeat this entire procedure on the other unit
of the transmitter/receiver pair.