User`s manual

FOX 500 Tx/Rx • Operation
Operation, cont’d
3-8
FOX 500 Tx/Rx • Operation
3-9
Memory Presets menu
Figure 3-6 is a flowchart that shows an overview of the Memory
Presets menu, its submenus, and the available settings.
ADVANCED
CONFIG
Menu
Menu
30 sec.
Menu
Next
Menu
Menu
Menu
AUDIO
CONFIG
MEMORY
PRESETS
30 sec.
RECALL
< NA > 29
30 sec.
CLR PRESETS
< NO > YES
Next
Menu
Menu
SAVE
< NA > 30
Next
Next
OUTPUT
CONFIG
PICTURE
CONTROL
AUDIO
CONFIG
Menu
EXIT MENU
PRESS NEXT
Menu
Select N/A
or a preset
number.
Preset
number:
01 to 30.
Select N/A
or a preset
number.
Preset
number:
01 to 30.
FOX 500
n n .n k n n Hz
Figure 3-6 — Memory Presets menu flowchart
Memory presets, which are saved values of the horizontal and
vertical position and sizing information are saved in nonvolatile
memory. When the FOX 500 is powered down and later
powered back up, the settings are available for selection using
the Save submenu (see below). Saving the settings to a preset
overwrites the settings previously written to that preset.
Recall submenu
Rotate the Adjust [ knob while in the Recall submenu to select
(< >) either the displayed preset number (01 through 30) or N/A
(NA) for no preset. Press the Next button to recall the current
settings to the displayed preset. Select N/A and press the Next
button to exit the submenu without recalling the settings.
Save submenu
Rotate the Adjust [ knob while in the Save submenu to select
(< >) either the displayed preset number (01 through 30) or N/A
(NA) for no preset. Press the Next button to save the current
settings. Select N/A and press the Next button to exit the
submenu without saving the settings.
Clear Presets submenu
Rotate either Adjust knob to select (< >) Yes and press the Next
button to erase all presets. Select No and press Next to exit the
submenu without clearing the presets.
Advanced Configuration menu
Figure 3-7 is a flowchart that shows an overview of the
Advanced Configuration menu, its submenus, and the available
settings.
AUDIO
CONFIG
Menu
Menu
30 sec.
Menu
Next
Menu
Menu
Menu
ADVANCED
CONFIG
30 sec.
AUTO MEMORY
< OFF > ON
30 sec.
PATTERN
NONE
Next
Menu
Menu
AUTO IMAGE
TRIGGER
Next
Next
OUTPUT
CONFIG
PICTURE
CONTROL
Menu
EXIT MENU
PRESS NEXT
Menu
• None
• Color Bars
• Grayscale
• Alt. Pixels
MEMORY
PRESETS
FOX 500
n n .n k n n Hz
Figure 3-7 — Advanced Configuration menu
flowchart
Auto Memory submenu
The auto memory function automatically saves the horizontal
and vertical position, horizontal start, total pixels, and pixel
phase settings for different input resolutions. When on,
auto memory applies the settings based on the sensed input
resolution.
Rotate either Adjust knob while in the Auto Memory submenu
to select (< >) either on or off for the auto image function. Press
the Next button to save the current settings.