User`s manual
FOX 500 Tx/Rx • Operation
Operation, cont’d
3-6
FOX 500 Tx/Rx • Operation
3-7
Output Configuration menu
Figure 3-4 is a flowchart that shows an overview of the Output
Configuration menu, its submenus, and the available settings.
ADVANCED
CONFIG
Menu
Menu
30 sec.
• RGBHV
• RGsB
Menu
Next
Menu
Menu
Menu
OUTPUT
CONFIG
30 sec.
FORMAT
RGBHV
30 sec.
Next
Menu
SYNC
<
FLW
>
FORCE
Next
PICTURE
CONTROL
AUDIO
CONFIG
MEMORY
PRESETS
Menu
EXIT MENU
PRESS NEXT
Menu
FOX 500
n n .n k n n Hz
Figure 3-4 — Output Configuration menu flowchart
Format submenu
Rotate either Adjust while in the Format submenu to select the
desired video output format (RGBHV or RGsB).
Sync submenu
The display or projector may require a negative sync signal.
Rotate either Adjust knob to select FLW (Follow) (the output
video sync follows the input sync) or Force (sync is forced
negative).
Audio Configuration menu
Figure 3-5 is a flowchart that shows an overview of the Audio
Configuration menu, its submenus, and the available settings.
N
The Gain submenu is only available when both fiber cables
are installed between the transmitter and receiver.
ADVANCED
CONFIG
Menu
Menu
30 sec.
-18.0 dB to
+10.0 dB
Menu
Next
Menu
Menu
Menu
AUDIO
CONFIG
30 sec. 30 sec.
OUTPUT LVL
<
CONS> PRO
Next
Menu
Menu
MUTE
<
OFF
>
ON
Next
Next
OUTPUT
CONFIG
PICTURE
CONTROL
MEMORY
PRESETS
Menu
EXIT MENU
PRESS NEXT
Menu
FOX 500
n n .n k n n Hz
* This submenu is only
available when both fiber
cables are installed
between the transmitter
and receiver.
*
GAIN
00.0 dB
Figure 3-5 — Audio Configuration menu flowchart
Gain submenu
Rotate either Adjust knob while in the Gain submenu to select
the input audio gain or attenuation value, from -18 dB to +10 dB
in 1.0 dB increments. The default is a 0 dB audio level.
Mute submenu
Rotate either Adjust knob while in the Mute submenu while in
the Mute submenu to select or deselect the audio output mute
function.
Output Level submenu
Rotate either Adjust knob while in the Output Level submenu to
set the audio level for the output. The available levels are CONS
(consumer) level (–10 dBV) and PRO (professional) (+4 dBu).