Owner's manual

Extender Series • Installation
2-19
PRELIMINARY
Mounting the Extender MK to the knockout box
1. Remove power from the line driver by disconnecting the
power supply.
2. Place the line driver through the opening in the wall or
furniture and into the knockout box. Take care not to
damage the cables, which lie next to the line driver at the
side of the box.
3. Mount the line driver’s faceplate to the knockout box with
machine screws as shown in the following illustration.
M59 Cable
Extender MK Box Exploded_021209.eps
Extender MK
COMPUTER IN
AUDIO IN
EXTENDER MK
3.5 x 30 mm
Screw
Double Wide
Dry Lining Box
Mounting the Extender MK to the knockout box
4. Reconnect the power supply and restore power to the
equipment.