Owner's manual

Extender Series • Installation
Installation, cont’d
2-18
PRELIMINARY
Mounting the Extender D
1. Remove power from the line driver by disconnecting the
power supply.
2. Place the Extender D through the opening in the wall or
furniture and into the wall box. Take care not to damage
the output cables, which t behind the line driver at the
back of the wall box.
3. Mount the Extender D to the wall box with machine screws
as shown in the following illustration.
COM
PUTE
R I
N
AUD
IO IN
Wall opening
is flush with
edge of box.
Wall Box
Decora
Faceplate
Extron
Extender D
VGA-QXGA
Line Driver
with Audio
Mounting the Extender D to the wall box
4. Attach the Decora wall plate to the Extender D as shown in
the illustration above.
5. Reconnect the power supply and restore power to the
equipment.