Setup Guide User Manual

EDID 101 Setup Guide, Continued
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2009 Extron Electronics. All rights reserved.
Step 4 — Confirm power
Turn on the video source.
When the DVI or VGA source is on, the EDID 101 LED lights green, indicating power is being received.
N
During normal operation the EDID 101 can be powered using +5 VDC from pin 9 of a DDC compliant VGA
source (101V) or pin 14 of a DVI source (101D).
Step 2 — Mount the EDID 101
The small footprint of the EDID 101 and the ability to be powered through DVI or VGA cables connected to a PC or
laptop simplify installation. Mount the device as required.
Step 3 — Connect the EDID 101
a. Connect a DVI (101D) or VGA (101V) cable from the source to the EDID 101 INPUT.
b. Connect a DVI (101D) or VGA (101V) cable from the EDID 101 OUTPUT to the display or distribution system.
N
The EDID 101 is a pass-through device and should be located as close to the input source as possible.
The total length of DVI cabling, including input and output cables, connected to the EDID 101D should not exceed
maximum recommended lengths for standard DVI applications.
c. Set the first DIP switch to the desired vertical frequency (default is
ON, 60 Hz).
d. For the EDID 101D, set the second DIP switch to the DVI input
signal format, digital or analog. The switch is not used on the
EDID 101V.
e. The EDID 101 has now been configured for the selected
parameters. Continue to step 2.
RS232
AUDIO
INPUTS
AUDIO
OUTPUTS
L
R
L
R
L
R
1
2
1
3
4
2
1.5A MAX
R
1
2
G
B
H
V
R
G
B
H
V
INPUTS
OUTPUTS
R
G
B
H
V
100-240V 50-60Hz
3
4
1
2
H
V
H
V
H
V
H
V
1
ON
2
3
4
Projector
Extron
Crosspoint 300 42 HVA
Wideband Matrix Switcher
Laptop
Flat Panel
Display
Extron
EDID 101V
EDID Minder
Extron
EDID 101V
EDID Minder
PC
VGA OUTPUT (DISPLAY)
VGA OUTPUT (DISPLAY)
VGA INPUT (SOURCE)
EDID 101D
VGA OUTPUT (DISPLAY)
VGA INPUT (SOURCE)
EDID 101D
VGA OUTPUT (DISPLAY)
12V
0.4A MAX
POWER
INPUT LOCAL OUTPUT OUTPUT
DVI DA2
SUPPORTS
DVI-D ONLY
LCD
Flat Panel
Display
Extron
DVI DA2
DVI Distribution
Amplier
LCD
Flat Panel
Display
Extron
EDID 101D
EDID Minder
DVI-D OUTPUT (DISPLAY)
CONFIG
DVI INPUT (SOURCE)
EDID 101D
DVI OUTPUT (DISPLAY)
DVI Cable
6’ max.
PC
1 2
ON
60
Hz
50
DIGITAL
SIGNAL
ANALOG