Operating instructions

Table Of Contents
2-3Digital XPoint Matrix Switchers • Installation
Mounting instructions
Rack mount the switcher as follows:
1. Attach the rack mounting brackets to the switcher with the eight
provided #8 machine screws (figure 2-1).
1.5A MAX
100-240V 50-60Hz
INPUTS
1 2
3
4 5 6 7 8
OUTPUTS
1 2 3 4
5 6
7 8
EXT. REF.
IN
RS232/422
OUT
#
8 Screw (4 Places)
E
ach Side
Mounting Screws (2 Plcs)
Each Side
or
Rack-mounting
Bracket
Table/
Wall-mounting
Bracket
Drill pilot holes —
3/32” (2.4 mm) di
a.
1/4” (6.4 mm) dee
p
Figure 2-1 — Mounting the Digital XPoint Switcher
2. Insert the switcher into the rack, aligning the holes in the mounting
bracket with those of the rack.
3. Secure the switcher to the rack using the supplied machine screws.