Specifications

www.extron.com
© 2010 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
32
N E W P R O D U C T S
bulk cAbles & connectors
speciAlized products
The Extron EDID 101V is an EDID Emulator featuring
EDID Minder
™
, an Extron exclusive technology
designed to provide constant and continuous EDID
- Extended Display Identication Data management
with VGA source devices. EDID Minder ensures that
the source powers up properly and reliably outputs
content. Pre-stored EDID is communicated to the
source based on a user-selected resolution and
refresh rate. Alternatively, this EDID emulator can
be set to capture and store EDID information when
connected to a display. The EDID 101V is housed in a
compact 1" high, one-eighth rack width enclosure for
convenient, discreet installation.
FEATURES
•
EDID Minder
™
• Selectable resolutions and refresh rates
• EDID capture mode
• Can be powered directly from the VGA source
• 1" (2.5 cm) high, one-eighth rack width
metal enclosure
Extron DTP26 cable provides enhanced signal
transmission for Extron digital twisted pair extenders,
including the DVI 201 Series, HDMI 201 Series and
DVI DL 201. With Extron DTP26 cable, high resolution
digital video signals up to 1920x1200 and 1080p/60
can be extended to 175 feet, versus 100 feet with
standard CAT 5e cable. Extron DTP26 cable consists
of four individually shielded copper pairs and an overall
braided shield. The cable is constructed using 26 AWG
solid copper conductors, utilizing an S/FTP shielded
foil twisted pair design for superior noise immunity
and high performance. Extron DTP26 cable is
available in plenum and non-plenum, 1,000 foot spools
in self-dispensing packaging. DTP RJ45 shielded plugs
are also available, sold in packages of 10.
FEATURES
•
Engineered for use with Extron digital twisted
pair extension products including DVI 201 Series,
HDMI 201 Series, and DVI DL 201 transmitters and
receivers
• S/FTP design with individually foil wrapped
conductor pairs and overall braided shield for noise
immunity and low crosstalk
• Facilitates extension of 1920x1200 and 1080p/60
digital video signals up to 75% farther than
standard CAT 5e cable
• 26 AWG solid copper conductors
• DTP26 RJ45 shielded plugs also available
EDID 101V
EDID Emulator for VGA
DTP26
26 AWG Shielded Digital Twisted Pair Cable
Model Version Description Part Number
EDID 101V EDID Emulator for VGA . . . . . . . . . . . . . . . . . . . . . . . . 60-991-01
PS 124
Multiple Output 12 Volt DC Power Supply
The PS 124 is a rack mountable multiple output
12 volt DCpower supply. It delivers a total of 4.0 amps
across all outputs with no per-port current limitations,
allowing connected devices to receive current based
on load requirements. The PS 124 reduces the number
of desktop power supplies by providing power for up to
eight or more devices,resulting inpower consolidation
and centralized powermanagement.
FEATURES
•
Provides eight 12 volt DC outputs, 4.0 amps total,
using eight 2-pin captive screw connectors
• No per-port amperage limitation
• Dual-color status LED for normal operating and
overload conditions
• Rack-mountable 1U, quarter rack width,
metal enclosure
• Extron-designed 100-240 VAC, 50/60 Hz,
international power supply is rated at 150,000
hours MTBF
Model Version Description Part Number
PS 124 12 VDC, 4.0 Amp Power Supply . . . . . . . . . . . . . . . 60-1022-01
Model Version Description Part Number
DTP26/1000 Non-Plenum 1000' (300 m) spool . . . . . . . . . . . . 22-214-03