Specifications

www.extron.com
© 2010 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
30
N E W P R O D U C T S
AAP 102
COMPUTER
100-240V - 5AMAX
ArchitecturAl connectivity
Model Version Description Part Number
AVTrac 482C Carpet Inlay, No AC power . . . . . . . . . . . . . . . . . . . . 42-155-00
AVTrac 482R Rubber Inlay, No AC power
. . . . . . . . . . . . . . . . . . . . 42-156-00
AVTrac 482C Carpet Inlay, w/AC US, Prewired Conduit
. . . . . . 42-155-24A
AVTrac 482R Rubber Strip, w/AC US, Prewired Conduit
. . . . . 42-156-24A
Model Version Description Part Number
AVTrac INST CPT Cable Pass-through Kit for AVTrac . . . . . . . . . . . . . 70-714-02
Model Version Description Part Number
AVTrac INST TRANS PT AVTrac External Transition Adapter . . . . . . . . . . . . 70-679-22
AVTrac
®
Low Profile Floor-Mount Raceway System for A/V Connectivity
AVTrac
®
Cable Pass-Through Kit
Table Leg Kit for AVTrac
AVTrac
®
Retrofit Transition Adapter
Raceway-to-Wall Transition for AVTrac
The Extron AVTrac
®
is a low profile, floor-mounted
raceway system with a modular AAP - Architectural
Adapter Plate enclosure. Two 4-foot (1.2 m) tracks
combine to create the 8-foot (2.4 m) raceway designed
for use in any environment in which A/V devices
cannot be positioned near a wall or other area where
power, data, and A/V connections are traditionally
located. AVTrac is a discreet, cost-effective alternative
to floor coring for poke-through devices, trenching
for floor boxes, and raised access flooring. AVTrac is
ideal for use in classrooms, training centers and other
reconfigurable spaces, and corporate boardrooms,
as well as legacy installations and architecturally-
sensitive environments.
FEATURES
•
Low profile cable raceway system
• Cost-effective alternative to floor coring and
trenching
• ADA compliant 8-foot (2.4 m) total length cable
raceway and side ramps
• Modular enclosure with 2 double-space and
2 triple-space AAP openings
• Easy access cover panel
• AC power modules available for US, Europe, and
other major world markets
The AVTrac
®
Cable Pass-Through Kit mounts at the
end of an AVTrac Extension Kit and is designed for
applications where cables need to be passed from
the wall to a hollow table leg, desk, or a fixedlectern
location. The Cable Pass-Through Kit can also be
used at either end of an AVTrac Extension Kit to allow
the seamless transition of cables from one table leg
to the other. The Cable Pass-Through Kit minimizes
the number of termination points and corresponding
signal loss by allowing continuous cable runs between
primary connection points within the system.
FEATURES
•
Provides cable transition into or between hollow
table legs
• Designed for use with the AVTrac Extension Kit
• All necessary materials are included for installation
The AVTrac Retrofit Transition Adapter is designed
to provide a smooth transition fromthe AVTrac floor-
mounted raceway to a wall-mounted patch panel.It
facilitates cable pass-through from wall-mounted
AC outlets and A/V connection plates to the raceway
system. In addition,it provides an alternative solution
when base studs cannot be cut due to stringent building
codes. The AVTrac Retrofit Transition Adapterincludes
a UL-approved, US style Edison 6-foot AC power cord
that enables AC to be passed through knockouts
conveniently located on either side of the box.
FEATURES
•
Facilitates cable pass-through from wall-mounted
AC power outlets and A/V connection plates to
AVTrac
• US style, Edison, 6-foot power cord included
• UL-approved
• Includes all necessary materials for installation
• Available in black