User Guide Owner's manual

There are two subsets of transmitters and receivers in two different enclosures or form
factors:
• DVI 201 Tx/Rx — These units are housed in quarter rack width metal enclosures.
They can be set on a tabletop or mounted in a rack, under or through furniture, or to
a projector pole. The transmitter in this form factor has a local monitor output.
NOTE: The non-Decora models do not input, transmit, receive, or output audio.
• DVI 201 A D Tx/Rx — These units are housed in enclosures that can be mounted
in UL standard wall boxes with Decora
®
-style face plates. These units also convert
computer level audio to balanced or unbalanced stereo audio.
NOTES: • A non-Decora transmitter or receiver is partially compatible with a
Decora receiver or transmitter.
• A mixed form factor system can transmit and receive video and RS-232
communications.
• A mixed form factor system cannot transmit and receive audio, as the
non-Decora models do not input, transmit, receive, or output audio.
DVI 201 Tx
non-Decora
Transmitters
TransmittersReceivers
Receivers
DVI 201 Tx
non-Decora
DVI video
Control
DVI video
Control
DVI 201 A D Tx
Decora
DVI 201 Rx
non-Decora
DVI 201 A D Rx
Decora
DVI 201 A D Tx
Decora
DVI 201 Rx
non-Decora
DVI 201 A D Rx
Decora
DVI video
Control
DVI video
Control
Audio (pass)
DVI video
Control
DVI video
Control
DVI video
Control
DVI video
Control
Audio (pass)
The units can be purchased as a pair (of the same form factor) or individually. Each
purchased pair and each individual transmitter is shipped with a single external desktop
12 VDC power supply that accepts 100 to 240 VAC, 50-60 Hz input. A single power
supply connected to either the transmitter or the receiver can power both units through
one of the TP cables that link the units.
NOTE: In this manual, the terms “DVI 201,” “DVI 201 Tx,” “DVI 201 Rx,”
“transmitter,” and “receiver” refer to the applicable unit in either form factor,
unless otherwise specified.
DVI 201 • Introduction 2