User Guide User guide

DTP T HWP/UWP 232/332 D Transmitters • Remote Control 19
X1& = Verbose mode 0 = clear/none
1 = verbose mode (default)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
X1( = Force VGA to DVI out (UWP models only) 0 = HDMI (default)
1 = force VGA input to be DVI output
X3) = Pixel phase value 0 to 63, default is 32
X3! = Total pixels value ±255 of default value (depends on input rate)
X3@ = Horizontal/Vertical start value 0 to 255 (default is 128)