User Guide Manual

DTP DVI 230 D Transmitter and Receiver • Introduction 1
Introduction
• About this Guide
• About the DTP DVI 230 D Extenders
• Features
About this Guide
This guide describes the Extron DTP DVI 230 D family of Digital Visual Interface (DVI)
Extenders, which consists of the DTP DVI 230 D Tx and DTP DVI 230 D Rx. This guide
describes how to install, operate, and configure them.
About the DTP DVI 230 D Extenders
The Extron DTP DVI 230 D extenders are a family of DVI transmitters and receivers (see
figure 1) which are housed in enclosures that can be mounted in Underwriters Laboratories
(UL) standard wall boxes with Decora
®
-style face plates. A transmitter and receiver pair
extends the usable distance of DVI digital video and RS-232 or IR control signals over one
Category (CAT) 5e, 6, 6a, or 7 unshielded twisted pair (UTP) or shielded twisted pair (STP)
cable. The DTP DVI 230 D transmitter and receiver also route audio. The video, control, and
audio (if applicable) signals can be transmitted up to 230 feet (70 m).
INPUTS
LOCAL OUT
DVI-D
AUDIO
Tx Rx G Tx Rx
RS-232
IR
OUTPUTS
DVI-D
AUDIO
Tx Rx G Tx Rx
RS-232
IR
OVER DTP
1
31
42
31
42
31
42
2
3
100
LINK
ACT
COM
IR
INPUT
RELAY
TX RX
R
IPL 250
®
ON
OFF
DISPLAY
MUTE
SCREEN
UP
SCREEN
DOWN
VCR
DVD
DOC
CAM
LAPTOP
PC
RS-232
Projector
RS-232
PC
Extron
DTP DVI 230 D Tx
DVI Twisted Pair
Extender
Extron
DTP DVI 230 D Rx
DVI Twisted Pair
Extender
TCP/IP
TouchLink
Control
System
CATx Cable
up to 230' (70 m)
Figure 1. Typical Transmitter and Receiver Application
A DTP DVI 230 D system consists of a transmitter (Tx) and a receiver (Rx). The pair can
handle a single link of DVI-D digital video and a bidirectional RS-232 or IR link.
The DTP DVI 230 D transmitter and receiver are sold separately. Each transmitter is shipped
with a single external desktop 12 VDC power supply that accepts 100 to 240 VAC,
50-60 Hz input. A single power supply connected to either the transmitter or the receiver
can power both units through the twisted pair cable that links the units.