User guide

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Programming Guide 51
Command and Response Table for SIS Commands
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Create ties
NOTES:
• The matrix switchers support 1-, 2-, and 3-digit numeric entries ( 1 , 02 , or 003 ).
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003% .
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The ! tie command, & tie command, and % tie command can be used interchangeably.
• The ! tie all command, & tie all command, and % tie all command can be used interchangeably.
Tie input
X!
to output
X@ X!
*
X@
! Out
X@
•In
X!
•All
]
Tie input
X!
to output
X@
.
Example:
1*3!
Out03•In01•All
]
Tie input 1 to output 3.
Tie input
X!
to output
X@ X!
*
X@
& Out
X@
•In
X!
•RGB
]
Tie input
X!
to output
X@
.
Example (see note above):
10*4&
Out04•In10•RGB
]
Tie input 10 to output 4.
Tie input
X!
to output
X@ X!
*
X@
% Out
X@
•In
X!
•Vid
]
Tie input
X!
to output
X@
.
Example (see note above):
7*5%
Out05•In07•Vid
]
Tie input 7 to output 5.
Quick multiple tie
E
+Q
X!
*
X@
!...
X!
*
X@
!
}
Qik
]
! , & , and % ties are valid.
Tie input to all outputs
X!
*! In
X!
•All
]
Tie input
X!
to all outputs.
Example:
5*!
In05•All
]
Tie input 5 to all outputs.
Tie input to all outputs
X!
*& In
X!
•RGB
]
Tie input
X!
to all outputs.
Example:
8*&
In08•RGB
]
Tie input 8 to all outputs.
Tie input to all outputs
X!
*% In
X!
•Vid
]
Tie input
X!
to all outputs.
Example:
10*%
In10•Vid
]
Tie input 10 to all outputs.
Read ties
NOTE: The ! read tie command, & read tie command, and % read tie command can be used interchangeably.
Read tied input
X@
!
X!]
Input
X!
is tied to output
X@
.
Read tied input, RGB output
X@
&
X!]
Input
X!
is tied to output
X@
.
Read tied input, Vid output
X@
%
X!]
Input
X!
is tied to output
X@
.
Channel mute commands
Channel mute
X@
*1B Vmt
X@
*1
]
Mute output
X@
.
Channel unmute
X@
*0B Vmt
X@
*0
]
Unmute output
X@
.
Read channel mute status
X@
B
X#]
1 = mute on, 0 = mute off.
Global channel mute
1*B Vmt1]
Mute all outputs.
Global channel unmute
0*B
Vmt0
]
Unmute all outputs.
NOTE: X! = Input number 00 – 16 (20, 32, 36) (00 = untied)
X@ = Output number 01 – 16 (20, 32, 36)
X# = Mute status 0 = not muted, 1 = muted