Setup guide

About the DMS 1600 and DMS 3600
The DMS 1600 and DMS 3600 (see figure 1) are configurable matrix
switchers that distribute DVI signals. I/O boards route signals that
are compatible with all Extron DVI video product lines. The matrix
switcher routes any input signal to any combination of outputs.
The matrix switcher can route multiple input/output configurations
simultaneously.
AUDIO
DVI-D INPUT
FOXBOX 4G Tx DVI
RS-232
OVER FIBER
ALARM
Tx Rx 1 2
12V
1.0A MAX
POWER
AUDIO
DVI-D OUTPUT
FOXBOX 4G Rx DVI
RS-232
OVER FIBER
ALARM
Tx Rx 1 2
12V
1.0A MAX
POWER
MODE
AUDIO
DVI-D OUTPUT
FOXBOX 4G Rx DVI
RS-232
OVER FIBER
ALARM
Tx Rx 1 2
12V
1.0A MAX
POWER
MODE
1
ON
2
AUDIO
DVI-D INPUT
FOXBOX 4G Tx DVI
RS-232
OVER FIBER
ALARM
Tx Rx 1 2
12V
1.0A MAX
POWER
MODE
1
ON
2
ANAHEIM, CA
RESET
RS232/RS422
REMOTE
LAN
ACT
LINK
100-240V
50/60Hz
1.2A MAX.
100-240V
50/60Hz
1.2A MAX.
REDUNDANT
PRIMARY
DISCONNECT BOTH POWER
CORDS BEFORE SERVICING
1 - 4
5 - 8
9 - 12
13- 16
17 - 20
21 - 24
25 - 28
29- 32
33 - 36
FAN ASSEMBLY
FAN ASSEMBLY
PRIMARY POWER SUPPLY
REDUNDANT POWER SUPPLY
DVI-D OUTPUTS
ABCD
DVI-D OUTPUTS
ABCD
DVI-D OUTPUTS
ABCD
DVI-D OUTPUTS
ABCD
DVI-D OUTPUTS
ABCD
AB
DVI-D INPUTS DVI-D OUTPUTS
CD ABCD
AB
DVI-D INPUTS DVI-D OUTPUTS
CD ABCD
AB
DVI-D INPUTS DVI-D OUTPUTS
CD ABCD
AB
DVI-D INPUTS DVI-D OUTPUTS
CD ABCD
UPS 507
UNVERSAL SIGNAL PROCESSOR
ADJUST
DETAIL
ZOOM
/PAN
BRIGHT
/CONT
COLOR
/TINT
SIZE
POSITION
MUTE
FREEZE
AUTO
IMAGE
PIP
PRESET
6 754321
MENU
NEXT
INPUTS
CONFIG
HD Camera
FOXBOX Tx DVI
FOXBOX Rx DVI
USP 507
PC
Extron
DMS 3600
Modular DVI Matrix Switcher
Digital Monitors
DVI Projectors
HDTV Monitors
Analog Monitor
DVI Equipped
PCs
Compact HDTV
Camera Systems
Figure 1. Typical DMS 1600 Application
The matrix switcher can be remotely controlled via its Ethernet LAN
port, a serial port, or a USB port using either the Windows-based
Extron Matrix Switchers Control Program or the SIS.
The switcher has two internal, hot-swappable 100 VAC to 240 VAC,
50-60 Hz, 175-watt power supplies that provide worldwide power
compatibility and reliability.
Configurability
The DMS 1600 and DMS 3600 are assembled from I/O boards.
• The DMS 1600 can include up to four I/O boards.
• The DMS 3600 can include up to nine I/O boards.
There are three types of I/O boards available:
• 4x4 DVI input and output board
• 4 DVI input board
• 4 DVI output board
By adding or removing I/O boards within certain rules that are
detailed in "Configurability rules", below, you can expand and
contract the DMS 1600 and DMS 3600 from a 4-input by 4-output
matrix to up to:
• DMS Matrix 1600 —
A 16-input by 16-output matrix
• DMS Matrix 3600 — A 36-input by 36-output matrix
Configurability rules
There are certain rules for configuring the DMS matrix switcher for
proper operation, as detailed below:
•
The top slot (slot 1) MUST contain a 4x4 DVI input and output
board.
•
The next slot (slot 2) can contain any of the three board types
(a 4x4 DVI input and output board, a 4 DVI input board, or a
4 DVI output board).
• A 4x4 DVI input and output board can be followed (in the slot
directly underneath it) by any of the board types.
• After you insert a 4 DVI input board or a 4 DVI output board, all
active boards underneath it MUST be the same type.
• If you install a blank panel, all slots under it MUST contain blank
panels (you cannot skip a slot).
DMS 1600 and DMS 3600 • Introduction2 3DMS 1600 and DMS 3600 • Introduction