User Manual

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software 80
Name presets — Allows you to assign a name to each of the memory presets.
NOTES:
• Preset names are limited to 12 upper- and lower-case alphanumeric characters,
space, and the _ and / characters.
• The following characters are invalid or not recommended in preset names:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
Show RS-232 Strings — Displays the ASCII commands that are used by the current
configuration. You can refer to these for SIS programming.
I/O group settings — Allows you to establish I/O groups.
Room configuration — Allows you to assign outputs to rooms or delete outputs from
rooms.
NOTE: A Room is a subset of outputs that are logically related to each other, as
determined by the operator. The DMS matrix switcher supports up to 10 rooms, each
of which can consist of from 1 to 16 outputs.
Initialize ... — Initializes and clears any or all of the following: ties, presets, preset
names, icon names, and icons.
Preferences menu
Immediate Changes — Causes configuration changes to take effect
immediately.
Hold/Verify Changes — Delays implementation of configuration
changes until the Changes – Take button is pressed.