User Manual

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software 79
Hardware Status — Opens the Status dialog box (see figure 49), which provides an
overall view of the status of the matrix switcher, including the power supply voltages, the
temperature status, the Remote RS-232/RS-422 port configuration, and the installed and
updated firmware status.
Proper operation.
Component has failed.
Figure 49. Status Dialog Box
Physical Switcher Layout — Opens the DMS Physical Configuration dialog box
(see figure 50), which displays the I/O board type installed in each slot. The In Channels or
Out Channels field can be helpful in identifying a specific input or output. In figure 50, for
example, output 29 is identified as slot 8, connector A (8o01).
Figure 50. Physical Configuration Dialog Box